Brief Introduction:
This machine can test rubber, plastic, leather, metal, nylon thread, fabric, paper and aviation, packaging, construction, petrochemical, electrical, vehicle and other materials in tension, compression, bending, shear, adhesion, Peeling, tearing... and other tests are the basic equipment for quality control, incoming inspection, physical property testing, mechanics research, and material development.
Machine Structure:
The measurement and control system is a measurement and control system specially designed for microcomputer electronic universal testing machines, microcomputer hydraulic universal testing machines, and microcomputer presses. Can perform tensile, compression, bending, shear, tear, and peel tests. Use PC and interface board to collect, save, process and print test results of data. It can calculate the maximum force, yield force, average peel force, maximum deformation, yield point, elastic modulus and other parameters; curve processing, multi-sensor support, graphical interface, flexible data processing, MS-ACCESS database support, Make the system more powerful.
Test Standard:
ISO 7500-1，JJG475-88，ASTM E4，DIN5122，JIS B7721/B7733，EN10002-1，EN1002-2，BS1610，GB/T228，GB/T2792，ASTM D3330，GB/T15598-1995，HGT2-163，GT/T7753-1987，GT/T7754-1987，GB/T7124-86，GB/T7124-2008
|
Commodity |
Universal Testing Machine |
|
Model |
MT8-800 |
|
Code # |
751-320 |
|
Capacity |
1KN, 2KN, 5KN, 10KN, 20KN, 50KN, 100KN, 200KN(Available for double capacities) |
|
Display |
Computer display |
|
Force Resolution |
1/500,000 |
|
Force Accuracy |
≤±0.3% |
|
Stroke Resolution |
1/500,000 |
|
Control Mode |
Full computer operating mode |
|
Test Stroke |
1000mm |
|
Distance between two columns(Test Width) |
550mm |
|
Test speed |
0.001~1000mm/min omputer set with up and down quick adjustment button of grips |
|
Stop Mode |
Overload stop, emergency stop, specimen damage automatic stop, upper and lower limit automatic stop, automatic reset function |
|
Machine Drive |
Servo-motor driven, synchronous wheel and precision ball screw drive |
|
Force sensor |
Load Cell comply with ASTM-E4 standard which accuracy is limited within 1.0 % |
|
Dimension |
108*85*205cm (W*D*H) |
|
Weight |
About 1250kg |
|
Power |
2500W |
|
Voltage |
380V 50HZ 2KW |
|
Accessories |
1 set of grips, test software, USB computer connection wire |
|
Optional |
Dell Computer |
|